I'm gonna try one last time to sell this stuff before I give up. First , Please only serious people reply and no low ballers. Second I live in Maryland so if you live in a area close to me ( i.e. PA or VA ) I'll be willing to meet you somewhere to save on shipping. Also unless you have a Civic or CR-X thats has a ZC , D16a^ or D16z6 please don't ask if this will fit your accord , prelude , or this and that cause honestly I don't know off hand. I was using all the stuff you see below on my 91' Civic HB with a JDM DOHC ZC motor on the turbo set-up. I got tons of e-mails before asking if this or that will fit this or that car. If you have a Civic/CR-X with a D16 or "ZC series motor most of the stuff has been changed to work with it ( i.e. I already ported the exhaust manifold for the ZC ). I don't mean to be a dick about it it's just it takes alot of time to reply to all these e-mails and half are " Will this fit " Questions from not serious people. I took pic's yesterday and I should have them up for those who are interested by tomorrow. Also if you want to reach me e-mail at zccivichb@thezcr.com and I'll give you a Phone number where you can reach me at because I'm gonna be buys these next couple of days sending things out and preping my car for the new motor set-up so no P.M.'s cause I'll most likeyl not get them. Here's what I still have and whats been sold also on items where shipping is extra I'll go half with the person on cost:
-DSM 450cc injectors with modified seals : SOLD
-1G DSM BOV and flange: SOLD
-Starion FMIC: Basicly SOLD if Accord comes threw with his end of the deal. if not I have a second person who wants it so it's sold basicly.
-1G DSM Side mount I/C: Very good condition>> $75 +shipping
-Apexi S-AFC; $200+shipping ( I have someone wants it but I haven't recieved any money yet so it's still up for grabs until then )
-Stock JDM DOHC ZC Oil Pan with oil return flange for turbo BOLTED WITH A GASKET: $100 shipped ( the pan is basicly brand new and I used a GTi 1.8T Return flange with a gakset. Very clean and not crappy JB Welded. Also becuase it's bolted and uses a gasket you can re-use the return flange as many times as you want)
-Holly inline fuel pump and relay: $100 shipped
-Stock JDM PM-7 ZC ECU: $100 shipped
-Stock JDM DOHC ZC Intake manifold and Throttle body: $100+shipping
-Stock JDM DOHC ZC Valve cover: $75+ shipping ( I just sand blasted the valve cover and re-painted it black )
-Stock JDM DOHC ZC Cam shafts and cam gears: $100 + shipping for both
-ACT 11lb Chromealloy Streetlite Flywheel for a 90'-91' Civic/CR-X only: $200 +shipping ( This flywheel is only 6 months old and will only work with a 90'-91' Civic/CR-X cause of the spline and clutch size difference from the 88' and 89' )
* Complete turbo set-up *
- 92' HF/STD manifold ported for a ZC
- TD04 turbo off a WRX ( VERY good condition just has very very little shaft play )
- Adapter plate , section of TD04 down pipe and most gaskets.
-SS briaded -4 oil feed line ( just the line not the T )
----- $350 shipped for everything listed under thr words * Complete turbo set-up *
For better details about some of the stuff and if your serious e-mail and I can give you a number where to reach me at. Thanks ,
-Jason-
zccivichb@thezcr.com

 

I'll buy something.

 

im looking at what else i need lol.... wish i could afford the smic but i can get one here for 50.00 3 blocks down the road from me hehe

 

Hey I finally have pic.'s of alot of the stuff . e-mail if you're interested and I'll send them to you