Ok im new to the forum but not to hmt ive been reading and coming here almost everyday for the past 2 years.
any way i have a 1990 civic hatch si and i just installed a t-25 on it.
setup

Stock D16A6
t-25
OBX manifold with a t-3 to t-25 adapter plate and gaskets between them (i know the obx sucks already broke a support)
dsm o2 housing with out any downpipe
Walbo 255lph pump
vortech 12:1 FMU
Adjustable FPR
Probe front mount
Random piping
no BOV
Stock injectors and stock computer
boost guage
iridium plugs

thats pretty much it
im running 10 psi on stock wastegate and im guessing because there is no backpressure since t-25 is supposed to be 8
my engine has 160,000 miles on it but good equal compression
my engine burned a little bit of oil before and the turbo i have blows some more into it because the seals are bad the guy i bought it from said it was just rebuilt but i don't think it was but there was no shaft play what so ever.
anyway i ran a 15.7 at 87mph in the 1/4 and i cant figure out why it doesnt have the power it should
it breaks up mid way through second and then feels good between 4-6500 rpm's
then in third it doesnt feel like it is pulling that hard at all im confused on what my problems are i know that i need to get a missing link for the CEL but that shouldnt make it that bad i dont think and another thing is the oil burning and i dont know if that is somthing that will cause a big power loss or not. If you guys have any ideas please help Thanx

 

Perhaps a better fuel management with a decent tune would get you the extra power, a bigger turbo wouldn't be a bad investment either.

 

how would i go about tuning it and i thought a t-25 would be perfect for stock d16a6??

 

oh yea by that way i have tuner toys oil lines and custom water lines

 

t-25 is small but that isn't your problem. Your fmu with nothing for the map and timing is bad. You would be better to chip your ecu and run a basemap for now.

 

where could i get a chip for it
also i have a 89 integra ecu from d16a1 lying around would that be any better??

 

xenocron.............. you have been reading HMT for 2 years

 

yea maybe longer and i still dont know things but any way i also have a laptop computer should i get somthing that i can hook to my laptop like turboedit?? and the chips from xenocron?

 

yes and yes

 

with the turboedit will that stop the map sensor from seeing boost?? so i will not have to but the missing link or check valves