90 civic hatch si t-25 Help Please
Ok im new to the forum but not to hmt ive been reading and coming here almost everyday for the past 2 years.
any way i have a 1990 civic hatch si and i just installed a t-25 on it. setup Stock D16A6 t-25 OBX manifold with a t-3 to t-25 adapter plate and gaskets between them (i know the obx sucks already broke a support) dsm o2 housing with out any downpipe Walbo 255lph pump vortech 12:1 FMU Adjustable FPR Probe front mount Random piping no BOV Stock injectors and stock computer boost guage iridium plugs thats pretty much it im running 10 psi on stock wastegate and im guessing because there is no backpressure since t-25 is supposed to be 8 my engine has 160,000 miles on it but good equal compression my engine burned a little bit of oil before and the turbo i have blows some more into it because the seals are bad the guy i bought it from said it was just rebuilt but i don't think it was but there was no shaft play what so ever. anyway i ran a 15.7 at 87mph in the 1/4 and i cant figure out why it doesnt have the power it should it breaks up mid way through second and then feels good between 4-6500 rpm's then in third it doesnt feel like it is pulling that hard at all im confused on what my problems are i know that i need to get a missing link for the CEL but that shouldnt make it that bad i dont think and another thing is the oil burning and i dont know if that is somthing that will cause a big power loss or not. If you guys have any ideas please help Thanx |
Re: 90 civic hatch si t-25 Help Please
Perhaps a better fuel management with a decent tune would get you the extra power, a bigger turbo wouldn't be a bad investment either.
|
Re: 90 civic hatch si t-25 Help Please
how would i go about tuning it and i thought a t-25 would be perfect for stock d16a6??
|
Re: 90 civic hatch si t-25 Help Please
oh yea by that way i have tuner toys oil lines and custom water lines
|
Re: 90 civic hatch si t-25 Help Please
t-25 is small but that isn't your problem. Your fmu with nothing for the map and timing is bad. You would be better to chip your ecu and run a basemap for now.
|
Re: 90 civic hatch si t-25 Help Please
where could i get a chip for it
also i have a 89 integra ecu from d16a1 lying around would that be any better?? |
Re: 90 civic hatch si t-25 Help Please
Originally Posted by turbocivic6776
where could i get a chip for it
|
Re: 90 civic hatch si t-25 Help Please
yea maybe longer and i still dont know things but any way i also have a laptop computer should i get somthing that i can hook to my laptop like turboedit?? and the chips from xenocron?
|
Re: 90 civic hatch si t-25 Help Please
yes and yes
|
Re: 90 civic hatch si t-25 Help Please
with the turboedit will that stop the map sensor from seeing boost?? so i will not have to but the missing link or check valves
|
All times are GMT -5. The time now is 02:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands