im looking for a disc swap for my 91 crx dx and alot of people have the like 98 gsr disc and trail arm will these wor or only 2g ones?

 

2nd gen only i believe. I think later gen's are shorter arms. Get either a CRX Si rear swap, or one from a teg...they're both the same pieces, even the same size rotors and pads, only dif. is integra e-brake cables are longer than the CRX Si ones. And get a rear alignment done when you're finished...trust me on this one...did mine and the rear was measuring toe out in inches, not degrees :P

 

all trailing arms (not control arms) from 88+ have the same dimensions.

use your oem upper/lower/compensator arms w/ the gsr trailing arms and you'll be golden.

 

thank you sir i have brake cables and lines for a crx with rear disc, alot of people are selling the gsr trail arm cheap without cables and sht thats why i ask

 

yup, you MUST use your control arms, gst are 1/16" longer.

also DO NOT losen the compensator arm (that little arm at the front of the trailing arms) from the body, if you losen it from the body you will need an alignment.