setup is 450cc dsm

on stock fuel setup

d16z9

plz tell me if its ok to run?

look at the misc tab

and all 10x!

make with Uberdata166

here a link for the map : http://forum.pgmfi.org/download.php?id=4399

 

The knock sensor is enabled so I hope you're using an ecu with a knock board, and with 450's it looks like it would run really lean.

 

if you dont see the map on the 1.66

sure you will see lean ----

 

If you open it in any pre 1.7 you see nothing but ---- period, on the fuel maps. 1.7 and up uses 16 bit fuel values instead of 8 bit with a multiplier.

I opened this in 1.66. It is way lean and the fuel in the boost columns is too low.