need help my rom is ok???
 

setup is 450cc dsm

on stock fuel setup

d16z9

plz tell me if its ok to run?

look at the misc tab

and all 10x!

make with Uberdata166

here a link for the map : http://forum.pgmfi.org/download.php?id=4399

Re: need help my rom is ok???
 

The knock sensor is enabled so I hope you're using an ecu with a knock board, and with 450's it looks like it would run really lean.

Re: need help my rom is ok???
 

if you dont see the map on the 1.66

sure you will see lean ---- O0 :l

Re: need help my rom is ok???
 

If you open it in any pre 1.7 you see nothing but ---- period, on the fuel maps. 1.7 and up uses 16 bit fuel values instead of 8 bit with a multiplier.

I opened this in 1.66. It is way lean and the fuel in the boost columns is too low.