i was wondering of anyone on here has reoiled their shocks. i have read a couple of small articles about it but none really explained it in detail. also if you have what oil did you use. i was told 25w would be good for a swift i assume that it would also be good on a civic but just want to make sure. i plan on doing this when i get an extra set of stock shocks.

 

are you talking about stock shocks? i dont believe you can even do that

 

i thought stock shocks were oil fill. and what you do is drill a hole towards the top of the body. drain the oil into a graduated cylinder. the refill with the same amount of the new oil then plug the hole. they suggest to weld it but i was planning to put a screw in there then cover with jb weld

 

if it aint broke don't fix it!

 

well once it warms up i am going to do it. i just dont have 400 for some ajustable shocks. i was just hoping that this had been done on something other than a swift

 

you could possibily use fork oil. the same oil people use to service motorcycle forks..this is a guess

 

thats what i was plannign to use i was wondering about the weight of the oil

 

i have herd little about the procedure but, i thought shocks were pressurized with gas?? i just read a few articles and i guess there not pressurized; hell try the 25 weight...

 

as far as i know the oem shocks that cam on the car are oil filled and the aftermarket shocks are gas charged