im planning to run a dsm t25 on a zc, how much power could i expect to put out? just aiming at like 200hp..

 

t25 is too small

 

A T25 is a good turbo to cut your teeth on, then you'll probably want to move to something a little bigger. Use the T25 to learn how it all works and put together your first system. Once you have that accomplished, and have tuned it to it's limits, then go one to something else.

Craig

 

i had a t25 on my zc and the torque is great but it will leave u wanting more on the top end, even at 12psi. get a t3 60 trim if u wanna have fun

 

I had a T-25 on my first ZC motor. It made 160 WHP. It was VERY quick on the street. If you have the turbo already, go for it, you will love the quick spool up.

 

i also have a ct26, but haven't consider it how would it do, i am thinkin bout jus goin wit the t25 as a started, but if the ct26 is better to start with than i will use it.

 

Just start with any t3, so that way you wont have to worry about changing yur mounting flange. If you really want to start small, go with a 42/48, but a super 60 wouldnt be bad either.

 

t3 oWNS jOOO

 

if u go with the ct26 I might take the t25 off your hands if the price is right

lmk

 

t25's belong with the plastic rings in the oversized gumball machines. Been there, done that, won't be doing it again. Even on a 1.5 SOHC non-vtec it was lacking IMO.