I just want to know how you lower boost because the link in FAQ is down. I have an internal wastegate, the 13g auto dsm turbo and Ive heard that you just bend it in the wastegate arm actuator, I guess its obvious but how far should I bend it in to get about 6 psi, thanks

 

You just have to lenqthen the arm.

 

How? All I heard was that pushing the actuator in towards it would lower the boost,, if so you got any pics of how to do it

 

you can cut the actuator in half thread both ends and use somthing to lengthen or shorten the actuator how you want.

 

so basically the metal stick or line running to the wastegate, cutting it or whatever, but wouldnt bending it in be easier to do?

 

ok , i get the shortening of the actuator arm part (metal line), but when you do that, if you make it shorter does that make less boost and when you lengthen it does it give more boost

more length= more boost
less length= less boost ............................?

actuator-------------extended-----------wastegate
actuator----shortened----wastegate -------------------- is this what i want for lower boost

 

im pretty sure lengthening the wastegate arm lowers boost

 

i would say so also, cuz the shorter the arm, when the WG opens, its would open for longer

 

Longer = less
shorter = more
bend = shorter = more

 

when you lengthen the actuator arm, you arm lowering the wastegate, ie, it will open at a lower psi