the thread from a 2004 chrysler seabring gtc model fits the oil feed from this 14b i have. I think i will drill a small hole in this drain plug and take the washer off of it.

an oil feed and drain kit or the correct fittings are otherwise difficult to find for myself not at any of the hardware stores

 

just find out what the thread size is, then order the an fitting with the same size thread :P

 

the an fittings are pretty huge and i cant find them for regular fitting prices.

 

how do you plan to hook the feed line to the end of an oil drain plug?

 

quote from my original post:

I think i will drill a small hole in this drain plug and take the plastic washer off of it."

then i will weld a small steel barb fitting to it after preparing the bolt and fitting and get it right.

as long as i can weld i might as well not pay $$$ for an oil feed kit im broke.

 

Just make sure you drill a big enough hole and most barbed fittings I've seen are brass so you won't be able to weld it. I guess you can try jbweld.

 

negaive on the jb weld. the piece will be mild steel i will probably just weld a small piece of tubing on the end and the hole will be close to the factory oil hole in the turbo, or 1/32" or a little bigger 1mm hole

 

good for you, thanks for the info, take pics and post up... sounds like more work then it worth being... oil feed // return kit is cheap...