what if I took a junkyard intercooler like a probe or DSM or something and got a big plastic container about an inch bigger than the IC all around, cut some holes in the side for the charge pipes, sealed it all up good with urethane and ran my water lines into the plastic container and everything...

Actually, I know this would work.

thoughts?

 

LOL... i was thinking more like a big tub of ice water I could mount maybe on the floor in front of the passenger seat... hot engine coolant is the deval!

 

my idea is better, get a dsm intercooler, cover seal it up, except on the sides where normally air would pass through, put some fabric (like a wetsuit type deal) that will let air through but keep water in. then mount it where air will be hitting it, and still keep the tank and water pumps

 

you would never hit full boost, your flow would suck.. not to flame on ya dude but thats a pretty shitty idea

 

If you're in a race only application, you can empty the wiper fluid container, then run some hoses to the intercooler with a few mist nozzles that spray onto the intercooler. Fill the wiper fluid reservoir with cold water and whenever you turn on the wiper fluid you have a nice water to air intercooler sprayer.


Sean

 

---- all that noise, just get some liquid nitrogen... as long as we're talking unfeasable concepts here...

 

The water spraying on the intercooler is feasable though; a buddy of mine did it on his stock 1G Talon Tsi side mounted intercooler but he did it with the rear wiper. I'll ask him sometime this week how he did it.

 

wtf are you talking about bad, nothing would change about the intercooler except there would be water around it, and air would be let through the instead of totally blocked off