fmu questions

Reply Subscribe

Thread Tools

Search this Thread

Feb 15, 2003 | 07:25 PM

turboboy

Guest

Posts: n/a

fmu questions

i found a vortech fmu for a good price and i was wondering what ratio will work best on a d16y7(internally stock) running low boost from an rhb5(im gonna aim for 5-6 psi by messing with the wastegate actuator)...it has a 12:1 in it right now, but would that make me run too rich?

Feb 15, 2003 | 09:42 PM

TrixR4kids

0.5 BAR

Joined: Dec 2002

Posts: 60

Re:fmu questions

Iam running that turbo on my y7 @ 7 psi
I bought a used vortech SFMU with 8:1
disk in it and i dont run lean @ wot in 3rd
gear under load.
I cant confirm but guys here run 8:1 on
y7 and 12:1 on y8

Feb 16, 2003 | 12:04 AM

turboboy

Guest

Posts: n/a

Re:fmu questions

ok thanks a lot man...ill probably use the 12:1 disk until i get a new one(do you know why the y8 guuys usually use the 12:1?)....any suggestions/problems/comments you had with your setup?...got any pics or info?

Feb 16, 2003 | 04:27 AM

TrixR4kids

0.5 BAR

Joined: Dec 2002

Posts: 60

Re:fmu questions

The only real problem i had was,
I coundnt get the fuel pressure dialed back
down to what it was before the fmu install
A budy told me it was because i was also
running the stock fuel pressure regulator.
But since it doesnt increase fuel pressure
until it sees boost im really not getting
worse gas mileage at idle up to aprox.
2200 rpm . (that i notice)

Feb 16, 2003 | 05:23 AM

J-SMITH69

0.0 BAR

Joined: Dec 2002

Posts: 0

Re:fmu questions

the problem with fmus and high output fuel pumps are that if you don't control the extra psi your fuel pump is putting out. you will run richat idle and cruising... and probably all the time if your setup is acually tuned the way it should be if your fuel pressure was normal...