RPM SWITCH
Administrator
Joined: Dec 2002
Posts: 13,988
3.0 BAR
Joined: Dec 2002
Posts: 3,396
1.0 BAR
Joined: Dec 2002
Posts: 442
Re:RPM SWITCH
if u get that activated switch for ur mini me dont forget to buy the pills to go with it... thats an expensive way to go if ur goin cheap... summitracing has one with the ---- built in and its alot cheaper.. $45 and u also need a bosh auto relay to send a 12v signal to ur vtec solenoid.. heres a site on the whole mini swap and wat u need to do it..
http://crx.honda-perf.org/articles/z6swap/z6swap.html
http://store.summitracing.com/partdetail.asp?part=2880
http://crx.honda-perf.org/articles/z6swap/z6swap.html
http://store.summitracing.com/partdetail.asp?part=2880
Guest
Posts: n/a
Re:RPM SWITCH
Forget all of that.. Just go get a push button, about 8' of wire, and run a circut to the VTec solenoid and hold it in your hand while your driving and push it at whatever RPM you want to activate VTEC!
Seriously.. skip the RPM switch, and get a VTec Controller. Yes, it's more money, and yes this site is about "homemade", but rigging your VTec to your shiftlight is just.. well, lame..
Seriously.. skip the RPM switch, and get a VTec Controller. Yes, it's more money, and yes this site is about "homemade", but rigging your VTec to your shiftlight is just.. well, lame..
Guest
Posts: n/a
Re:RPM SWITCH
Originally Posted by bad 2 the B-ONE ej
a friend of mine wired a switch in and mounted it to his shift ****, wire from vtec solonoid to the switch , ground it. simple. laaunch, switch to vtec, keep shiftin...
