can you check to see if the engine harness wires match colors with the interior harness where they plug in on the driver side please. the big plug.

 

they should.. if you ever end up with a wiring issue and you have to chase down certain components and match to to the pins from the ecu to see if you get some sort of resistence or to see if you get an open or closed circuit. you would never find the proper wire if it was a different color on the other side of that plug

 

its not very hard to look at a wire diagrahm.

 

thanks blackfoot I figured out my problem with my signal output. the driverside wiring was all off colors,none at all matched. I swapped them around to mate them and wa la! no check engine light and no more ignition signal output code!!! but I burned up two dizzy's cause I couldnt figure out what the prob was. but now I have a built h22a swap and converting over to obd1. and txdohczc if it were that easy I would of found it pretty quickly. I looked but I couldn't find anything about the plugs.