HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   zc timing (https://www.homemadeturbo.com/hybrid-tech-8/zc-timing-32546/)

Dr.Boost 01-02-2005 08:07 PM
Re:zc timing
 
Originally Posted by clayfigures119
"i have the msd btm and it never said what i should set the distributor to. so when i installed it i set the distributor to the stock timing with i think is 14 degrees btdc. is this the right place to put the base timing for the msd or is there another setting."


There is the question in the second sentence of my first post. what my management is has nothing to do with the question i asked. timing is timing fuel enrichment is just that, pertaining to adding fuel.
It matters because if you're running an FMU it obviously won't ---- with your timing like an AFC would and if you're running TurboEdit you can just sell that unit and call it a day.

For somebody looking for help you seem to have an attitude that forces people to not answer your questions. Good luck with that.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

surfer 01-02-2005 08:09 PM
Re:zc timing
 
people were just trying to save you money but you obviously have too much, go buy your zdyne unit and ask them what to do with your timing

ssl2k 01-02-2005 08:34 PM
Re:zc timing
 
---- this.

Speedracer32 01-05-2005 01:57 PM
Re:zc timing
 
Originally Posted by Dr.Boost
Originally Posted by clayfigures119

For somebody looking for help you seem to have an attitude that forces people to not answer your questions. Good luck with that.


All times are GMT -5. The time now is 05:30 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands