HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   ZC nad DX Automatics!!!HELP!!!!! (https://www.homemadeturbo.com/hybrid-tech-8/zc-nad-dx-automatics-help-10400/)

k4rr 10-05-2003 03:03 PM

ZC nad DX Automatics!!!HELP!!!!!
 
ok basically i just did a zc swap into my dx automatic.. and i am running a pr4 ecu from a 5spd integra.. however i am having tranny shifting problems..

is it possible i need to use an ecu from an automatic integra instead of a 5 spd since i still am running my auto dx tranny?

HMT-Admin 10-05-2003 03:44 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
That is very correct, the automatic tranny will normally freak out if you have a 5speed ecu in there. Get a automatic ecu, and you should be fine. Are you getting any codes?


Semnos 10-05-2003 04:12 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
yup

k4rr 10-10-2003 11:15 AM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
well the only coeds that i keep gettin are for the cylinder position sensor on the exhast cam shaft part of the motor but other than that the car runs fine just ic has no pickup whatsoever..

INDUCTION_HEAD 10-10-2003 12:02 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
my friend had the same problem with his crx with the engine code. it ended up being the two wires off the distributer being backwards. switched them around and boom.

hope that helps

k4rr 10-10-2003 12:23 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
thanx for the info however i get the code no matter which way the wires a r hooked up but it will only crank and run one way .. so i think the wires a r hooked up right its just throwing a code for some reason.. or maybe the sensor could be bad but i already replaced it.. or it could be a matter of i am using the wrong ecu

INDUCTION_HEAD 10-10-2003 12:41 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
Ya thats wierd... ecu i would think would have issues with an auto tranny. but those wires he had backwards, the car still ran either way. so i dunno if we r talking bout the same wires. We did his swap into a si tho. ill pop by his work and double check the location and etc...

INDUCTION_HEAD 10-10-2003 01:54 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
Just came back from his shop... it was the wires comming out of the cam sensor. i took a few pics so if u want i can send them to ya.
lemme know man

travis

turbohf 10-10-2003 01:59 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
so your running MPFI in a auto? you need a 90-91 Civic EX auto ECU, a PS9....

k4rr 10-10-2003 03:06 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
thanx for all of the info guys i'll update you later..

xtremecrxfreak 10-11-2003 08:21 AM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
ok i am just now realizing when i said ZC i should have mentioned that its a true JDM zc which is a dohc not an sohc there for do i need somethign different frmo the ps9 since it is sohc?

xtremecrxfreak 10-11-2003 08:23 AM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
by the way the reason xtremecrxfreak posted the message is because it has been me all along usung my friends usernam cuz he let me but i finally got to register.. so its stil the same guy i just have my own user name now is all..

turbohf 10-12-2003 01:23 AM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
well the DOHC ZC (both the 1.6l SOHC and 1.6l DOHC non-VTEC's are "ZC" motors) wont be being used to its full potental will an ECU from a SOHC car BUT nor is attaching it to a auto tranny, and its your only choice as far as i know...

btw good luck finding a PS9, its hella ------ rare...

xtremecrxfreak 10-17-2003 03:52 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
ok well i found a PS9 ecu on tuesday and i'll be getting it by this comming tuesday.. i'll let you know when i get it in my car if i am stil lhaving issues.. thnx everyone for all of your help and suggestions..

xtremecrxfreak 10-21-2003 01:58 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
ok fellas.. i just got my PS9 in i am going to install it tonight and then update everyone again..

RENR 10-21-2003 04:03 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
if your runing a dohc zc you should use the ecu from a 88-89 integra automatic. it has a higher redline than a ps9 and its made for the combo your runing. if you stick with the ps9 you wont use your engine to its max potential. lates

xtremecrxfreak 10-24-2003 09:41 AM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
ok well thanx for that info .. however i used the ps9 since i already got it.. but it still runs just like it did wiht the pr4 why would htat be?

88crxSi 10-24-2003 09:56 AM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
cuz its for SOHC ? ..

only thing I can think of its try a JDM ZC Auto ECU (if u can find 1) or a 88-89 teg auto ecu.

xtremecrxfreak 10-24-2003 10:38 AM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
ok cuz i just really gettin pissed of.. i mean its noones fault i just need my car running and is it p[ossible its not the ecu? i mena i hjave bought 3 and have a total of 4 now.. i really don;t wanna buy anymore..

turbohf 10-24-2003 12:14 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
its still controling a SOHC tranny, i think that its not wired up right. the PS9 has the ---- inside to control the lock up soliniods and ---- the 88-89 Integra DOES NOT (think it has a seperate computer to control AT features), i remember someone going threw this on the CRX Resource board, he ended up getting the PS9 from what i remember.

if you dont want the PS9 ECU i will buy it...

MikeJ-2009 10-24-2003 01:40 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
No, I will buy it. ;) That turbohf guy is a scammer, you don't want to deal with him. ha ha ;D j/k

turbohf 10-24-2003 10:10 PM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
how can you have a scammer buyer?!?!? i would send paypal that day with confirmed address/paypal account...

RENR 10-26-2003 01:21 AM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
your car is gona be runing shitty because your using a sohc ecu on a dohc motor. it does make a big difference. the zc needs more fuel and timing than a sohc engine. plus the ps9 has a 6500rpms redline and i think the zc is much higher than that. use 88-89integra ecu from an auto. just sell all the ecus that you have now and get the right one. oh and it does work with the trany you have, trust me ive done this swap twice before.

turbohf 10-26-2003 01:54 AM

Re:ZC nad DX Automatics!!!HELP!!!!!
 
well, if you are going to sell the PS9 please PM me...


All times are GMT -5. The time now is 01:16 PM.


© 2024 MH Sub I, LLC dba Internet Brands