zc
05-01-2003, 12:36 AM
#1
0.0 BAR
Thread Starter
Join Date: May 2003
Posts: 2
zc
its been awile since ive been on this site my username no
longer exists i enjoy this site alot the build ups are
excellent i do have a few questions regarding my zc engine
i have had two zcs the first spun a rod bearing first nite on the road at a stop light the second blew the head gasket which was a short block replacment from nippon motors and im wondering if the block was straight when sent so im now rebuilding the engine and i plan to fix oil starvation and checking and resurfacing head and or block
my question(s)is what oil pump do i use what rod and main bearings 89int? prelude88? or crx? i have found specs and parts lists all over but not one says anything about internals any advice would be appreciated thankyou
longer exists i enjoy this site alot the build ups are
excellent i do have a few questions regarding my zc engine
i have had two zcs the first spun a rod bearing first nite on the road at a stop light the second blew the head gasket which was a short block replacment from nippon motors and im wondering if the block was straight when sent so im now rebuilding the engine and i plan to fix oil starvation and checking and resurfacing head and or block
my question(s)is what oil pump do i use what rod and main bearings 89int? prelude88? or crx? i have found specs and parts lists all over but not one says anything about internals any advice would be appreciated thankyou
