|
Re: On a Z6, how important are...
On all the motors I've had or swapped for friend we removed all that with no problems. Only thing I put back on is the shield next to the flywheel.
|
Re: On a Z6, how important are...
I don't even put that ---- on... my flywheel's freeballin.
|
Re: On a Z6, how important are...
Originally Posted by TorganFM
I don't even put that ---- on... my flywheel's freeballin.
however, my built D will have both Z6 engine stiffeners because I happen to have them laying around. |
Re: On a Z6, how important are...
Ive ran d & b series for 8 years without the intake brackets.
|
Re: On a Z6, how important are...
scrap metal pile
|
Re: On a Z6, how important are...
i always run the bottom braces, but never the intake manifold one
|
not on mine either
cept the torque mounts i don't like my engine to move when i gas or decel |
Originally Posted by TorganFM
(Post 1175528)
lawl... mine doesn't have any of that ----. I only have the upper trans, the upper driver side, and the big bracket on the back. I took off the AC pump mount, and the passenger side lower ---- mount broke trying to take the bolt out.
|
I dont run any of them. Especialy the intake mani, because it makes pulling the head a bit eassier.
|
Originally Posted by igotnothin
(Post 1263082)
I dont run any of them. Especialy the intake mani, because it makes pulling the head a bit eassier.
|
| All times are GMT -5. The time now is 03:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands