|
Re:z6 and a6 block differences....
the block itself is the same, the pistons are different which is why you get different c/r's.
|
Re:z6 and a6 block differences....
did you re-use the bearings from the z6 block, or did you size up new bearings? Possibly the differn't blocks have differn't main bearing sizes?
|
Re:z6 and a6 block differences....
i swapped the bearings from the a6 block, it has all the a6 internals ecxept for the girdle from the z6. so i think the mains are the same
|
Re:z6 and a6 block differences....
not if it's a z6 block w/ a6 crank/rods. you may need to plastigauge that thing.
whats your setup, car, obd?, ecu? head, intake manifold?? |
Re:z6 and a6 block differences....
im running a z6 block and girdle, a6 crank pistons rods bearings, y8 head, 88si intake manifold obd0, zdyne secu
|
Re:z6 and a6 block differences....
quite the D-series slut arnt you? ;)
|
Re:z6 and a6 block differences....
Yea hes a dirty D slut!! But not for much longer! ::)
Give me all your parts mike! ;D |
Re:z6 and a6 block differences....
Originally Posted by AbaZ
quite the D-series slut arnt you? ;)
|
Re:z6 and a6 block differences....
Originally Posted by cjz89civic
these two blocks are exactly the same except for one has a oil control valve in the block (a6) and one has it in the head (z6) hince the reason when you do a z6 head on a a6 block you need to remove the one in the block of the a6.
|
Re:z6 and a6 block differences....
Originally Posted by varexsi
Originally Posted by AbaZ
quite the D-series slut arnt you? ;)
|
| All times are GMT -5. The time now is 05:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands