won't rev over 5k rpm please help.
2 Attachment(s)
i just finish installing my turbo with dsm 450cc and smc500 for fuel management.
and now i can't seem to get it over 5k rpm, its feels like limp mode, heres some info: p27 b18c1 smc500 dsm 450cc t3 turbo . please help, may this cause the problems picture below, the top piece broke. https://i283.photobucket.com/albums/...rx/Engine1.jpg Attachment 17422 Attachment 17423 its not the best but is what i have, please help. |
Re: won't rev over 5k rpm please help.
tune
|
Re: won't rev over 5k rpm please help.
well i had a crx with pretty much the same setup that ran fine and would rev to redline. Ive been trying different settings but its all the same, im using a wideband to keep an eye on it 11-13 is the best i can do for now.
So does the first picture with that broken piece affect the rev limit? there is a hole now, she i let it breath freely or plug it up. thank. |
Re: won't rev over 5k rpm please help.
wrap your mouth around it and suck. if anything comes out its working fine.
|
Re: won't rev over 5k rpm please help.
ok thank for the help lon thui
|
Re: won't rev over 5k rpm please help.
please reread the forum rules..
you MUST post a vin number of the motor even if it isnt for sale or you WILL be PERMA BANNED. please understand this is for you own protection. |
Re: won't rev over 5k rpm please help.
I really like the barely hanging on vac line connected to the WG with no fasteners :l
You sir are a ghetto ass O0 :1 |
Re: won't rev over 5k rpm please help.
Seems to be to rich at 5k, or turbo didnīt spin freely, i have that problem with my first turbo.
Try changing the basemap first. |
All times are GMT -5. The time now is 05:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands