Wiring EX cluster into a DX
#1
Wiring EX cluster into a DX
I got an Ex cluster and installed it into my 93 dx knowing that it wasn't wired for a tach...now im ready to wire the tach up, but I cant seem to get all the right wires together...I have the tach signal wire from the drivers side shock tower, I dont know what else I need, I think its just four wires but I cant find a diagram anywhere.
somebody knows right?
thanks guys
somebody knows right?
thanks guys
#3
Re: Wiring EX cluster into a DX
well in looking all over for the diagram to do this I have seen that some dx's are wired for a tach and some aren't so Idk wtf is going on there....but mine is missing the wires for it in the left side grey plug and I know it can be done so im looking for the answer
#6
Re: Wiring EX cluster into a DX
well I am using an automatic ex cluster in a manual 93 dx that came with no tach from the factory and it just doesnt have the wires for it...is it because its an auto cluster?...which makes no sense because the only thing different is the lighted gear selection thing which has its own plug.
#9
Re: Wiring EX cluster into a DX
so can someone verify for me how many wires should be in the left side grey cluster plug?
On the right side I have 12 slots and 10 wires. and on the left I have 10 slots and 8 wires.
On the right side I have 12 slots and 10 wires. and on the left I have 10 slots and 8 wires.
#10
Re: Wiring EX cluster into a DX
help me out guys, is there a way to test the tach in the cluster to see if it is broken ?
I went to the junk yard and looked at auto and manual eg's and they all had the same wiring as far as the cluster plugs go,,so I was wrong about that....
I went to the junk yard and looked at auto and manual eg's and they all had the same wiring as far as the cluster plugs go,,so I was wrong about that....