Who knows about bearings?Chime in, quick Q
#1
Who knows about bearings?Chime in, quick Q
So i have these bearings for a b18c5. ACL race bearings.
I have a b18c1 , just wondering if they would work. The only difference between the two is
b18c5 is + 0.001" Extra for oil clearence then the b18c1 and also Max Wall at Crown 0.0591" / 1.502mm on b18c1 and 0.0586" /1.489mm on the b18c5
would the b18c5 bearings stil lwork or no?
Reference:
http://www.aclperformance.com.au/us/...Bearingsus.htm
I have a b18c1 , just wondering if they would work. The only difference between the two is
b18c5 is + 0.001" Extra for oil clearence then the b18c1 and also Max Wall at Crown 0.0591" / 1.502mm on b18c1 and 0.0586" /1.489mm on the b18c5
would the b18c5 bearings stil lwork or no?
Reference:
http://www.aclperformance.com.au/us/...Bearingsus.htm
#3
Re: Who knows about bearings?Chime in, quick Q
Originally Posted by hatchboy
So i have these bearings for a b18c5. ACL race bearings.
I have a b18c1 , just wondering if they would work. The only difference between the two is
b18c5 is + 0.001" Extra for oil clearence then the b18c1 and also Max Wall at Crown 0.0591" / 1.502mm on b18c1 and 0.0586" /1.489mm on the b18c5
would the b18c5 bearings stil lwork or no?
Reference:
http://www.aclperformance.com.au/us/...Bearingsus.htm
I have a b18c1 , just wondering if they would work. The only difference between the two is
b18c5 is + 0.001" Extra for oil clearence then the b18c1 and also Max Wall at Crown 0.0591" / 1.502mm on b18c1 and 0.0586" /1.489mm on the b18c5
would the b18c5 bearings stil lwork or no?
Reference:
http://www.aclperformance.com.au/us/...Bearingsus.htm
#4
Re: Who knows about bearings?Chime in, quick Q
.0591" is green, while .0586 is red. (that's the width of the bearings, fyi)
It's a big difference. That could be a clearance difference from .002, which is what Honda tries to do from factory, to .15, which is a pretty big difference when it comes to oil clearances.
You need to measure everything, and look at your crank/block to see which bearings your engine calls for.
It's a big difference. That could be a clearance difference from .002, which is what Honda tries to do from factory, to .15, which is a pretty big difference when it comes to oil clearances.
You need to measure everything, and look at your crank/block to see which bearings your engine calls for.
Thread
Thread Starter
Forum
Replies
Last Post
LSD Motorsports
Turbo Parts For Sale
17
05-16-2007 07:35 PM
iluvmysh
General Discussion
24
01-16-2005 11:16 AM