welding
 

ok since i discovered this hole on my transmission, i've been shoppin' around and can't find a manual Accord, I thought about get the hole welded. The car runs fine, the tranny shifts great it's just that hole.

Re: welding
 

ya you can have it welded should run around 150 bucks+

Re: welding
 

jb weld to the rescue

Re: welding
 

I have hydro dx/lx accord transmissions

Re: welding
 

yeah, chris has everything, should ask him before you say ya cant find a trans.

Re: welding
 

You need to find someone with a TIG welder and have them weld it up with a Certanuim filler rod

Re: welding
 

Lemme guess, your diff exploded? I found some aluminum and bashed it into the appropriate shape, then jb welded the piss out of it. Its pretty solid.

Re: welding
 

jam a chicken bone in it.

Re: welding
 

I fixed an LS tranny with the same problem. GUy gets a new clutch installed, something explodes inside all the oil leaks out.

I took a look underneath and there was a dime sized hole where the diff is. Opened that bitch up and sure enough the input shaft bearing fell apart and shot out a ball bearing that the diff cought and blasted through the housing.

I just cleaned up the surrounding area put some masking tape outside the tranny's hole, and poured in the JB weld. I heated it with a blowdryer, and after a few hours bolted everything back up. and that ---- ran fine with no leaks.

Re: welding
 

jb thatn ----. i have personally seen jb weld do things well that it should not do at all. you could weld it, but thats time consuming and hard.

Re: welding
 

can jb weld work sure for how long is anyones guess.

Re: welding
 

commas man.^^

Re: welding
 

long enough to sell it to some else ;)

Re: welding
 

lol

wtf? "yeah there's a hole in my tranny but it works fine" i've heard of that before but I could imagine its only a matter of time before whatever put that hole in there gets real pissed and breaks somthing for good.