wat axels for eg h22 swap?/?
please lmk if you know thanks
|
Re: wat axels for eg h22 swap?/?
depends on int shaft and mount kit you use
|
Re: wat axels for eg h22 swap?/?
I would in with enjo mounts and drive shaft shop stage two axles. Then remove the center section of the intake butter flies. Then have fun. But if you have plans on boosting i would take the rear mounts poly out and take then to a machine shop and have copies made out of steel. Or you can go with HaSport mounts and still use the axles that i mentioned before. Sorry no link using my cell here at work. Just do a google search and they should show up.
|
Re: wat axels for eg h22 swap?/?
well i bought a cheap set of mounts from bambrose..im going to buy a set of raxels axels fro the swap but now i need to know wat im shaft i need..and as for the mani im buying a s2 and i have a 68mm tb...
|
Re: wat axels for eg h22 swap?/?
Originally Posted by 93z6t
well i bought a cheap set of mounts from bambrose..im going to buy a set of raxels axels fro the swap but now i need to know wat im shaft i need..and as for the mani im buying a s2 and i have a 68mm tb...
|
Re: wat axels for eg h22 swap?/?
what you do for wiring harness?
|
Re: wat axels for eg h22 swap?/?
I HAVE BEEN TOLD YOU CAN USE A 90-93 ACCORD INTERMIDIATE SHAFT AT 90-93 INTEGRA AXLES
|
Re: wat axels for eg h22 swap?/?
Originally Posted by jdmhatchracer94
I HAVE BEEN TOLD YOU CAN USE A 90-93 ACCORD INTERMIDIATE SHAFT AT 90-93 INTEGRA AXLES
|
Re: wat axels for eg h22 swap?/?
With that motor in that car, you will snap that outer shafts if you launch any. Daily drivng it's ok and going fast while moving will be ok but IF YOU LAUNCH ANY AT A DRAG STRIP YOU WILL BREAK THEM especially with slicks. Still go with stage 2 driveshaftshop axles and if you break those you can still get home with the teg axles. They are just made alot more stronger if you get the stage 2's.
|
All times are GMT -5. The time now is 01:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands