walbro 255 starting probblems
 

k i have a new pump in and now the car starts sometimes do i just need to bypass the ecu and run a hardware to the pump??? with a resister

Re: walbro 255 starting probblems
 

first of all this is a tech question.. what car is it on. and it sounds like you dont have much gas in it.

Re: walbro 255 starting probblems
 

i had this problem in a crx it was to much suction in the tank i wouldnt start, then you losen the gas cap and it fired right up. so i just ran no gas cap and never had the problem again

Re: walbro 255 starting probblems
 

hope no one smokes near that lol...you sure you put it all together right with the sock?

Re: walbro 255 starting probblems
 

yea i made a post about it and other people said they have heard of it and wasnt that uncommon and to find a vented gas cap. but i just said ---- it and ran nothing

Re: walbro 255 starting probblems
 

walbro pumps need atleat a 1/4 tank or they just dont pick up fuel. 1/2 tank+ is best for the crx/civic 88-91 tank

Re: walbro 255 starting probblems
 

man that sucks, must just be a problem on the older ones...never had that happen on 92+

Re: walbro 255 starting probblems
 

truth^^ if you have the supplied sock without the install kit to lower the sock in the tank more or just reuse the stock sock..

Re: walbro 255 starting probblems
 

my 95 goes past e and still putts along so your good on 92+

Re: walbro 255 starting probblems
 

no i have pleanty of gas in it lol i have a ef with a p28 ecu chiped