VTEC head on D16y7
 

Is it possible to replace my d16y7 head with a SOHC vtec head, or a DOHC vtec head? ANd would it be worth it.


Thanks
TT

Re:VTEC head on D16y7
 

sohc vtec would work, and be worth it

Re:VTEC head on D16y7
 

no on dohc, and yes on sohc vtec. but if you want neck breaking torque.....try something else. but if you want a little more power if tuned correctly, then yes. the mine me is pretty good on power. its really a bang for the buck. my 2 cents

Re:VTEC head on D16y7
 

how about the d16z6 on the y8 block? What kind of timing belt will this require?

Re:VTEC head on D16y7
 

you should check out pub143.ezboard.com/bhondadseries
there is usually a vtec head for sale on there classifieds.

Re:VTEC head on D16y7
 

a whole d16z6 can be found for roughly 5-700 bucks. in VERY good condition. long as it has the distributor you can go work on it.

i say change the whole motor.

Re:VTEC head on D16y7
 

a d16z6 head on a y8 block would be pointless.. both have the same power output

Re:VTEC head on D16y7
 

Ok I am going to replace the head then, I can get a SOHC vtec head for like $125.00 plus shipping. How much HP/torque do you think I will get out of the new head, and can I install it myself? Also I am going to put one of those adjustable cams on as well, how should I adjust the cam? Should I speed up or slow down the timing, and will this new head be better for turbo? All help is greatly appreciated im new to honda tuning :).

Thanks
TT

Re:VTEC head on D16y7
 

You want to slap a VTec head on your DX block. That is what raises the compression, thus giving you the higher hp and torque. Mini's are well worth it. Still not a B series stomper without work, but they're a good learning platform.

Depending on the combo, you can pop up to about 125hp.. install it yourself? Sure.. It's cake. Basically, take old head off, and put the new head on, slap on a VTec Controller or RPM switch.. if you want to go all out swap over your ECU.. There are a lot little things you can do..

Re:VTEC head on D16y7
 

might get a little... but nothing to brag about.. Z6 heads flow the best, and Y8 intake manifolds flow the best..

thats good for atleast 3hp! ;)

Jeff