HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7) (https://www.homemadeturbo.com/hybrid-tech-8/vitara-nippon-turbo-pistons-d15b7-yeah-yeah-its-b7-68975/)

JDMFantasy2K 10-25-2006 12:39 PM
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
 
Originally Posted by eg_project
Are the vitaras that low? I thought they were higher than that, although it kinda makes sense since mine didn't even come flush to the deck when at TDC. They were damn near a cm from the deck.
that's probably a good thing if your timing belt were to ever snap

eg_project 10-25-2006 12:44 PM
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
 
lol, yeah, I already blew up one head when I had a cam gear shear off the cam. Could save me a few $$.

whiterice 10-25-2006 01:00 PM
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
 
Originally Posted by eg_project
d16y7/z6 mini-me, but d15 and 16 pistons are the same...i think, just the d15 has a different stroke length. I couldbe wrong on this though.
Do some research.

Bone1 10-25-2006 02:19 PM
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
 
Originally Posted by eg_project
d16y7/z6 mini-me, but d15 and 16 pistons are the same...i think, just the d15 has a different stroke length. I couldbe wrong on this though.
you could be gay also..........

ososlohatch 10-25-2006 02:44 PM
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
 
Originally Posted by Mista Bone
you could be gay also..........
thats a good possiblity

eg_project 10-25-2006 03:02 PM
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
 
no, pretty sure that's not the case, stupid, occasionally, gay...hell no. I can get you a gay buddy for you to play with in the closet if you want though.

eg_project 10-25-2006 03:40 PM
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
 
So what diamater are d15/d16? also, what about the wrist pins? I thought it was :75mm/75mm and 19mm/19mm

--Ohh, wait the service manual says that at least the D16z6,D15b7,d15z1,d15b8 are all 75 mm diameter pistons, only difference is skite lenght by 1mm.

Bone1 10-25-2006 11:52 PM
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
 
rod length, deck height, pin location......all different

eg_project 10-26-2006 11:10 AM
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
 
I was referring to the piston alone, not the rod. I knew the stroke was diff, but I didn't know the pin location was different.


All times are GMT -5. The time now is 01:47 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands