Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
Hey, i wondering if i can use vitaras in my b7? i was planning to either b7 rods or crower b7 rods...any idea what my compression ratio would be? ???
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
for the price of a descent set of rods for the b7 you could build a d16, i'm in the same boat and it sucks, but the swap is def the best option.
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
neither.
7-4~7.6 c/r how much are you getting the crower d15b7 rods for? |
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
Originally Posted by whiterice
neither.
7-4~7.6 c/r how much are you getting the crower d15b7 rods for? |
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
i didnt think you could get vitaras for a d15 thought it was only the d16???
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
Originally Posted by 93z6t
i didnt think you could get vitaras for a d15 thought it was only the d16???
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
Originally Posted by whiterice
7-4~7.6 c/r
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
Originally Posted by eg_project
Are the vitaras that low? I thought they were higher than that, although it kinda makes sense since mine didn't even come flush to the deck when at TDC. They were damn near a cm from the deck. Could be bad, but the car runs and 25psi sounds like fun.
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
well maybe i should go with the domed pistons pm7
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
d16y7/z6 mini-me, but d15 and 16 pistons are the same...i think, just the d15 has a different stroke length. I couldbe wrong on this though.
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
Originally Posted by eg_project
Are the vitaras that low? I thought they were higher than that, although it kinda makes sense since mine didn't even come flush to the deck when at TDC. They were damn near a cm from the deck.
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
lol, yeah, I already blew up one head when I had a cam gear shear off the cam. Could save me a few $$.
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
Originally Posted by eg_project
d16y7/z6 mini-me, but d15 and 16 pistons are the same...i think, just the d15 has a different stroke length. I couldbe wrong on this though.
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
Originally Posted by eg_project
d16y7/z6 mini-me, but d15 and 16 pistons are the same...i think, just the d15 has a different stroke length. I couldbe wrong on this though.
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
Originally Posted by Mista Bone
you could be gay also..........
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
no, pretty sure that's not the case, stupid, occasionally, gay...hell no. I can get you a gay buddy for you to play with in the closet if you want though.
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
So what diamater are d15/d16? also, what about the wrist pins? I thought it was :75mm/75mm and 19mm/19mm
--Ohh, wait the service manual says that at least the D16z6,D15b7,d15z1,d15b8 are all 75 mm diameter pistons, only difference is skite lenght by 1mm. |
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
rod length, deck height, pin location......all different
|
Re: Vitara or Nippon turbo pistons in a d15b7? (yeah, yeah its a b7)
I was referring to the piston alone, not the rod. I knew the stroke was diff, but I didn't know the pin location was different.
|
All times are GMT -5. The time now is 11:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands