hey what is good to use for vacum hoses ibought some clear hose last year from lowes and its rated for 55psi when the hose got warm from the heat it sucked itself closed so what kind is good to look for special when motor is under boost

 

vacuum hose is the best to use.. go to advance or vatozone and get some..

 

i always used the thick black stuff from hardware store...its the same stuff as rubber fuel lines at autoparts stores afaik

 

yah i was thinking of that stuff they also have that stuff that they use to run water to refriggeraters for the ice machines its a cloudy color and its a little harder its rated at 140 psi do you think that ---- would work or will that stuff colapse from the heat too

 

Yes it will. Those lines are made for expansion pressure...meaning it takes 140psi to burst through it, not suck it in. I know you want to have a little bling factor goin' on, but normal vaccum line is best. I also wrap either an all purpose wire twisted down tight or zip ties on the vaccum T's and nipples...my motor has a tendency of blowing them off.

 

ok cool sounds good wtf do i care my crx is black primer what the hell does the motor got to look good for as long as i can whoop exspensive cars assees in my primer black pos crx