USDM vs EDM
Hi,
I have read a lot of posts but found very little about EDM engines (D16Z5). Is there any information on the net you know about this engine? I believe it should be similiar to USDM D16Z6 but there is different comp ratio. Can I use pistond from D16Z6 in my D16Z5 to decrease it? I don't wanna go with 15-18 PSI boost on 10,4:1 comp ratio. One more, I know B-series engine stuff is kind of Heavy duty comparing to D-series. Is there a chance to use for example rods and oil punp from B16 in my d16? Any info on EDM D16Z5 will be very appreciated ;) I know those are kind noob questions but you always talk about USDM rare about JDM and almost nothing about EDM while EDM is what I am interested in. Thanks |
Re: USDM vs EDM
which model civic do you have? I have a german EG5 w/ a D16z6 in it and the engine is the same as the USDM just the computer and front brakes are diffrent.
|
Re: USDM vs EDM
It is German CRX ED9, and I was able to figure out some specs.
Engine is in pieces now I am wating to get my sleves, gaskets and other junk including pistons (9.0:1). Anybody know if there is achance to put B16 rods? my D16 rods won't last boost i wanna have and I am not going to spend on HD rods as much as the car is worth itself :3, here performance parts are crazy expensive. Can B16 rods replace D16 ones and will last for about 300hp tx |
Re: USDM vs EDM
No, But LS rods can. Are you in germany? If so where? maybe we can work something out.
|
Re: USDM vs EDM
no, i'm in Poland what sux, it is hard to get a fair turbo here not spendig $1K only ---- TDI blowers not mentioning any aftermarket parts :'(.
Are LS rods any better than standard D16 rods? I want to make high HP (hoping for around 250HP what may be hard). LS is something typical for USDM so i know ---- about it. tx |
Re: USDM vs EDM
I think the only difference are the ecus, I have 2 euro ecus for my b16 they dont use knock sensors, and the PA
|
Re: USDM vs EDM
Ls are A form of B18 rod if you want high horsepower go with an after market rod. Contact tunertoys and see what they can do on shipping.
|
Re: USDM vs EDM
Originally Posted by Norbert
no, i'm in Poland what sux, it is hard to get a fair turbo here not spendig $1K only ---- TDI blowers not mentioning any aftermarket parts :'(.
Are LS rods any better than standard D16 rods? I want to make high HP (hoping for around 250HP what may be hard). LS is something typical for USDM so i know ---- about it. tx Oh and a German ED9 CRX should have a D16a9 in it surely? twin cam non vtec? |
Re: USDM vs EDM
Originally Posted by surfer
It must be lonely over there, every other person I speak to at the minute is from Poland, seems like england is the place to come to for work.
Oh and a German ED9 CRX should have a D16a9 in it surely? twin cam non vtec? |
Re: USDM vs EDM
Originally Posted by rudebwoy
yep I was helping a friend changing a blow motor today, they have the dohc zc non vtac
|
All times are GMT -5. The time now is 11:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands