Upgrade injectors need for mini-me?
I runny an Y7 w/Y8 head. Everything on the bottom end is stock and the head is stock with an ZEX cam. ECU is chipped w/ mugen spec. Is it necessary to have bigger injectors?
|
Re: Upgrade injectors need for mini-me?
mini-mei no turbo - NO as long as they are the 240cc injectors
mini-me with turbo - better upgrade before you blow a hole in it |
Re: Upgrade injectors need for mini-me?
mugen spec ecu tells me its na ... your fine ... dont run that ecu with boost it advance's the ---- out of your ignition timing
|
Re: Upgrade injectors need for mini-me?
240's are probably good, you may want to get a adj fuel pressure regulator and pound it up a few if your running a tad lean.
|
Re: Upgrade injectors need for mini-me?
Originally Posted by AbaZ
240's are probably good, you may want to get a adj fuel pressure regulator and pound it up a few if your running a tad lean.
^ a very good idea jeff |
Re: Upgrade injectors need for mini-me?
Mugen spec Chip tells me you probably got it off ebay, and those chips normally lose power instead of make!
|
Re: Upgrade injectors need for mini-me?
Originally Posted by bumblezc
Mugen spec Chip tells me you probably got it off ebay, and those chips normally lose power instead of make!
get a y8 ecu (or z6 if u are obd1) |
Re: Upgrade injectors need for mini-me?
I have a P28 chipped with a mugen spec. I have a friend that has a Hondata (for GSR) that we tried using it on my car and it turn out to be about the same redline.
|
Re: Upgrade injectors need for mini-me?
240cc injectors are good for 175 whp, at NA-friendly AFRs, and stock 41 psi rail pressure.
I dislike $$$ FPRs, get a second stock freebie from a friend and crush it a little in a vise until you hit desired pressure. |
Re: Upgrade injectors need for mini-me?
crush it???
|
All times are GMT -5. The time now is 12:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands