HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   troubleshooting ideas? (https://www.homemadeturbo.com/hybrid-tech-8/troubleshooting-ideas-93746/)

the 13th round 07-21-2008 09:50 PM

troubleshooting ideas?
 
my car has a mean ------- vibration at right around 3000 rpm.

shakes the fuckn doors off practically. car still runs fine just very bad vibration.

does it in nuetral as well as in gear. just around 2800-3200,

would this be a bad balance on the internals?? thats the only thing i can think of.


set-up:

boosted d16a6

rods, vitaras, cometic HG, 450cc dsm injectors, pr4 ecu chipped, t-bird turbo.


any ideas, if its an internal problem then its just gonna get left alone.

Guy-Fast 07-21-2008 09:59 PM

Re: troubleshooting ideas?
 
wheel bearins

seerex 07-21-2008 11:20 PM

Re: troubleshooting ideas?
 

Originally Posted by chris
wheel bearins

Even in neutral ???

hondacivc93 07-22-2008 05:07 PM

Re: troubleshooting ideas?
 
has it always done it since the build?

Hitchhikkr 07-22-2008 05:31 PM

Re: troubleshooting ideas?
 
Is it a speed related issue? IE does it do this at say 60mph in third and in fifth? Sitting still? Is the vibration consistent every time or not? New or old axles?

the 13th round 07-22-2008 11:40 PM

Re: troubleshooting ideas?
 
not speed related, rpm related,

does it in neutral, dont believe it to be the axles or wheel bearings, transfers through all the controls i.e. pedals, steering wheel, shifter.


hondacivc93 07-23-2008 01:59 PM

Re: troubleshooting ideas?
 
something weird like crank pulleyt or flywheel waay out of balance? drop them or something ?

the 13th round 07-23-2008 05:17 PM

Re: troubleshooting ideas?
 
i dont know what the ---- it is.

theory:

changed the alternator, shortly after this vibe starts. along with vibe is sqeuaking like a loose belt. just tightened the belt.

is it possible for an alternator to be out of balance??? its just a theory but ---- thats all i have.

cant isolate where the noise is coming from when i rev the engine.

Hitchhikkr 07-24-2008 10:04 AM

Re: troubleshooting ideas?
 

Originally Posted by the 13th round
i dont know what the ---- it is.

theory:

changed the alternator, shortly after this vibe starts. along with vibe is sqeuaking like a loose belt. just tightened the belt.

is it possible for an alternator to be out of balance??? its just a theory but ---- thats all i have.

cant isolate where the noise is coming from when i rev the engine.

Check and make sure your crank pulley bolt is tight. Ive seen dseries work the bolt loose and as such the pulley does the same. I highly doubt its your alternator. Its possible the belt tension that is on the alternator now has just brought this problem to light.

hondacivc93 07-24-2008 03:44 PM

Re: troubleshooting ideas?
 
could that alternator be locked up? the motor is trying to turn that thing over and its not happenin so its squelin?


All times are GMT -5. The time now is 09:42 AM.


© 2024 MH Sub I, LLC dba Internet Brands