turbozexcrxman

I have chewed a hole in the side of my tranny case.
What was left of the bearing you could look at though the case
I saved the gears....and all is good

But im out a bearing and case, my old tranny was an 90-91 teg..but the case isnt the same it has indentions for 2 rods inside....the one i fucked up has 3 indentions inside
Now I supposedly have a 92 GSR tranny with LS final drive....

The junkyard has one but its from a 92-93 teg.....im thinkin thats the one...

Any ideas

lock-pop!

pm bone

Smith-02

chris or turbohf seem to be more b-trans than bone, his dealings are d but he knows some b stuff too

turbozexcrxman

Any ideas Chris

Im taking it that any 92-93 cable tranny is diff...than a 90-91 cable
Since my clutch had to be a 92-93 integra

Bone1

yep, different designs.

90-91 or 92-93

turbozexcrxman

does it matter if its a 92gsr case

BigBird

The 92gsr trans internals are the same as the hydro internals.

turbozexcrxman

Went to the junkyard but someone pulled the tranny off a a 92 integra
It was the only one left on the lot cept for a 90 model......


Anybody gotta spare tranny case......

lilpooh21186

i have b16 hydro

Bone1

count your teeth for each gear.......I need all seven gear numbers.