tranny seal??
#12
Re:tranny seal??
Originally Posted by projekteg
Originally Posted by crx88Si
and don't forget to drain the tranny b4 u pull the axle
Kevin: Just taking out my ax.. aghahgahgahghagaha
lol... keep yer mouth closed!
#13
Guest
Posts: n/a
Re:tranny seal??
Originally Posted by projekteg
na, it's coming out of the pass side axle, but yeah, that would suck if it was the main tranny seal, seeing as how i just pulled the tranny two weeks ago, i would prolly shoot something if i had to do it again :P this is prolly when the axle seal got fucked up, i had a hard time getting the pass. axle out.
#15
Re:tranny seal??
I just did mine a few months ago. Weird oil spot on the tranny leaking from nowhere in particular.
The seal's are about $8 each from Honda. You have to pry it out and it's kind of weird getting them back in since it doesn't seem like they back up to anything. So be careful when you press them back in. And the "sealant" in the middle of the new seal is a weird line of grease so don't touch it. :P
The seal's are about $8 each from Honda. You have to pry it out and it's kind of weird getting them back in since it doesn't seem like they back up to anything. So be careful when you press them back in. And the "sealant" in the middle of the new seal is a weird line of grease so don't touch it. :P
#17
Re:tranny seal??
They're a little tight, but they should push right in.
Just be wary of pushing them too far or too hard. You can straighten them out once you get it in, but it's hard to describe until you actually try it. It's not like you push until they stop, ya know?
But yeah, flush.
Just be wary of pushing them too far or too hard. You can straighten them out once you get it in, but it's hard to describe until you actually try it. It's not like you push until they stop, ya know?
But yeah, flush.
#18
Guest
Posts: n/a
Re:tranny seal??
there is a stop...push it in all the way, it should be just past flush if i remember right. You want to push it in there flush with a big socket or block of wood or something, but be careful since they can get fucked up. This is just from my experience, so take it with a grain of salt
#20
Re:tranny seal??
Originally Posted by crx88Si
and don't forget to drain the tranny b4 u pull the axle