|
Re: tranny people i need your help!
ok so the third gear syncro is on the mainshaft.. Alright well here is another pic i have where you can see the mainshaft easier.
So where on the mainshaft is it? Sorry about all the questions. I want to get this right before i order the parts. https://img.photobucket.com/albums/v...i/100_0991.jpg |
Re: tranny people i need your help!
lowest brass ring on the left shaft, hidden in the pic by the 3-4 slider
|
Re: tranny people i need your help!
Originally Posted by b20accord
ok so the third gear syncro is on the mainshaft.. Alright well here is another pic i have where you can see the mainshaft easier.
So where on the mainshaft is it? Sorry about all the questions. I want to get this right before i order the parts. https://img.photobucket.com/albums/v...i/100_0991.jpg this is the syncro sleeve looks like http://img470.imageshack.us/img470/9...06192fz.th.jpg and when your tranny grinds this is what happens to the sleeve http://img470.imageshack.us/img470/9...06222ao.th.jpg note that the teeth inside are ground down. |
Re: tranny people i need your help!
hope that helps i am rebuilding my 95 ls tranny now
if u are in wa i can help u put it all togeather the dealership wants $320 for the 3/4 sleeve. hit me up if have any questons on trannys :) |
Re: tranny people i need your help!
Do you know of any aftermarket suppliers for transmission parts for Hondas?The dealer is just gross on prices.
|
Re: tranny people i need your help!
i got a place in cally that can doit cheaper
there sight is gear-speed.com |
Re: tranny people i need your help!
|
Re: tranny people i need your help!
that engine and tranny combo came from the 3rd gen accord rigt? i was think about swapping that into my 88 hatch, but decided not to because of "part availability" and go turbo ls vtec instead. if im not mistaken the transmission from the 86-89 accord and 86-87 prelude transmission will bolt directly to that block. i have rebuilt countles (5) 3gen accord trannies. i kept poping 3rd and 4 and 5th gears in tem. "damn high comp A20a3 motor" but it is just like everyone said.
you are on the right track. oh some advise: when you go to re-tq the shafts. tq them only to where the original bends in the nuts line up. if you go past that you will decrese your clearance in the transmission, and seize the gears together, "i have done this on my first rebuild" unless you go and clearance everything with the shafts tq to spec, thats my 2$ Nick |
Re: tranny people i need your help!
you also might want to check out www.3gees.com they have alot of writeups on this stuff. i know most people there are dicks, but they tend to have some good info.
|
Re: tranny people i need your help!
Originally Posted by Importordomestic
you also might want to check out www.3gees.com they have alot of writeups on this stuff. i know most people there are dicks, but they tend to have some good info.
|
| All times are GMT -5. The time now is 10:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands