bangodango

Is there anyway to take the TPS sensor off the throttle body? And will all b-series throttle bodies work with all b series mainfolds?

88dx

yes you can remove the TPS. If the TPS is held on with a sheer screw take your dremel and make a cut it it so u can usea flathead screwdriver to remove them. Theirs a few diffrent b-seires TB's all the ones ive had bolted up the same.

Guy-Fast

make the rivets flat headbolts dremel tool


all b series throttle bodies use same bolt pattern but all dont share the same throttle rotor or sensors

bangodango

thanks it worked but i am still throwing a TPS code.... I hooked up the sensor to a seperate throttle body while the car was running and it still threw the code but it was responding when I moved the throttle on that seperate throttle body. Any suggestions...

ghettoturbo

so you tried a new sensor and it still throws the code? is the sensor new? check your wiring

bangodango

sensor cam off a running single cam.... I can pull the wiring off the sensor while the car is running and no change. The Tps was working fine before I swapped engines.

ghettoturbo

im betting you have a fucked wire or two...check the continuity of all the tps wires

Guy-Fast

let me guess you didnt set your voltage

bangodango

Its fixed thanks for the help

88dx

Pff just eye ball it