HomemadeTurbo - DIY Turbo Forum
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   stripped bolts during tear down, FUCK (https://www.homemadeturbo.com/hybrid-tech-8/stripped-bolts-during-tear-down-fuck-62388/)

LSD Motorsports 06-01-2006 03:22 AM
Re: stripped bolts during tear down, FUCK
 
Originally Posted by Anubis_4_99
dont have a welder so number 2 is out
i live in nebraska where im pretty sure they've never heard of pep boys so im pretty sure thats out, lol
and i've been banned from drills since i drilled a quarter of an inch into my thumb.. and most other power tools as well.. i also stabbed my hand with sicors (butchered that word...)

lol thanks for the tips though i appriate it, im just gonna go with number 1 and hopefully not rupture a nut pryin them off
let us know if you lose a hand on this one ;)

Anubis_4_99 06-01-2006 01:32 PM
Re: stripped bolts during tear down, FUCK
 
well i went tool hunting and ended up spending $400 :l i need to stay out of stores if i want this damn build done... lol, i'll post up pics in a few ;D i got a craftsmen bolt out set for the stripped nuts and bolts which should work better then the vice grips.. but i can always resort back to them if needed :y

FooK 06-01-2006 11:41 PM
Re: stripped bolts during tear down, FUCK
 
I lied. As I assembled my LS block tonight I noticed that the oil pickup has a gasket on it, woopsie.

Anubis_4_99 06-01-2006 11:44 PM
Re: stripped bolts during tear down, FUCK
 
yeah i noticed that the goober who put this motor together last time used permatex gasket maker for almost every ------- part on this motor minus the HG

im disgustid :l

got the bolts out though... now i stripped a bolt on the flywheel and cant get the bolt out kit to grab.. any ideas? if i cant figure it out by tomorrow i'll just have the machine shop do it

whiterice 06-01-2006 11:46 PM
Re: stripped bolts during tear down, FUCK
 
  • if the vise grips keep slipping, you can use a file and make 2 flat spots on the bolt.
  • craftman as well as others have a socket with teeth that dig into the bolt head with you turn left.

Anubis_4_99 06-01-2006 11:53 PM
Re: stripped bolts during tear down, FUCK
 
Originally Posted by whiterice
  • if the vise grips keep slipping, you can use a file and make 2 flat spots on the bolt.
  • craftman as well as others have a socket with teeth that dig into the bolt head with you turn left.
its called a bolt out set, $40 for both sets which i bought.. the bolt on the flywheel is being a bitch and i cant grip it with them.. i completely forgot about grinding into it :1

Zeniceguycrx 06-02-2006 12:03 AM
Re: stripped bolts during tear down, FUCK
 
hey man if u need anymore bolts let me know cuz i gots them

Anubis_4_99 06-02-2006 12:10 AM
Re: stripped bolts during tear down, FUCK
 
Originally Posted by Zeniceguycrx
hey man if u need anymore bolts let me know cuz i gots them
need one for the flywheel and one for the oil pickup if you got em, for a Z6 if that matters

also i think the bolt ya sent for the belt was the wrong one but its cool, i'll get a pic of the one i need and throw another few bucks your way for it if you have it, thanks for shippin it so fast

Zeniceguycrx 06-02-2006 12:13 AM
Re: stripped bolts during tear down, FUCK
 
no prob hook me up with a pic and 5bucks and i will send u the right seatbelt bolt/flywheel bolt/ and the oul pickup bolt, dont realy want money for the bolts just the shipping, u see im in canada

Anubis_4_99 06-02-2006 12:22 AM
Re: stripped bolts during tear down, FUCK
 
Originally Posted by Zeniceguycrx
no prob hook me up with a pic and 5bucks and i will send u the right seatbelt bolt/flywheel bolt/ and the oul pickup bolt, dont realy want money for the bolts just the shipping, u see im in canada
thanks man, i'll send a pic tomorrow after i drop my block off, thanks again ;D


All times are GMT -5. The time now is 03:18 PM.
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands