srp pistons? good/bad?
these pistons seem to be one of the cheapest i have found. the site says they are made of a high silicon and low expansion aluminum. this leads me to believe they are less dense and then less strong than some of the other brands out there. id like to make 300+ hp. whats my best option for pistons? thanks
|
Re: srp pistons? good/bad?
what engine? if its d series vitaras are the cheapeast way to get the 300-400hp mark. plus srp are very good, at least from what i hear by all the people i know running them. personally ive never run anything other then stock so i have no input.
|
Re: srp pistons? good/bad?
It sounds like they are hypereutectic pistons. I have never seen them for an import motor before but they are good for around 250 horsepower I am guessing.
|
Re: srp pistons? good/bad?
they are for a b series. i sure hope that they are good for more than 250 hp as thats what stock is good for about
|
Re: srp pistons? good/bad?
srp's are forged and can handle much more than 250. If vitaras are cast and can handle 400, think how much these will handle.
|
Re: srp pistons? good/bad?
they seem like the best bang for the buck. they are the cheapest and they come with rings!
|
Re: srp pistons? good/bad?
i just bought some 81mm b series pistons for my car srp brand and i researched them a little they are forged and im pretty sure could hand a lot of hp
|
Re: srp pistons? good/bad?
Originally Posted by AJxr
what engine? if its d series vitaras are the cheapeast way to get the 300-400hp mark. plus srp are very good, at least from what i hear by all the people i know running them. personally ive never run anything other then stock so i have no input.
vitaras are hardxly the way to go imo srp's arent much more and being forged will take piss poor tuning and take it try that with a cast piston regardless vitars are cast. detonation will destroy cast pistons within a chance to repair the problem forged will take it over and over again |
Re: srp pistons? good/bad?
Originally Posted by hamburgler
these pistons seem to be one of the cheapest i have found. the site says they are made of a high silicon and low expansion aluminum. this leads me to believe they are less dense and then less strong than some of the other brands out there. id like to make 300+ hp. whats my best option for pistons? thanks
Originally Posted by chris
vitaras are hardxly the way to go imo
srp's arent much more and being forged will take piss poor tuning and take it try that with a cast piston regardless vitars are cast. detonation will destroy cast pistons within a chance to repair the problem forged will take it over and over again |
Re: srp pistons? good/bad?
SRP's will break much higher than a horsepower goal you're shooting for... ever. It's all in the tune.
|
All times are GMT -5. The time now is 09:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands