HomemadeTurbo - DIY Turbo Forum

Page 2 of 2

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)

- - sqealing belts? (https://www.homemadeturbo.com/hybrid-tech-8/sqealing-belts-12449/)

varexsi

11-25-2003 06:51 PM

Re:sqealing belts?

as a note of caution, be sure to disconnect the battery before you ---- with it. i learned the hard way and grounded it out and fucked up my ignition. i used a long pry bar in between the block and the alternator and pushed on it to get the right tension. loosen the 12mm bolt on the top of the alternator that's connected to this bar that has a curved slot in it and push it back, if it doesn't go you will have to loosen the lower alternator bolt and i believe it's either 14mm or a 17mm.

45psi

11-26-2003 12:55 AM

Re:sqealing belts?

thanks all. and the A/C has long been discarded.

bambooseven

11-26-2003 03:27 AM

Re:sqealing belts?

get a bar of soap and run it on the belt while the motor is on

ShadowRex

11-26-2003 07:51 AM

Re:sqealing belts?

Quote:

Originally Posted by bambooseven

get a bar of soap and run it on the belt while the motor is on

and watch yer little fingers lol Ya need them to open boxes LOL

Doofnoil

11-27-2003 07:27 PM

Re:sqealing belts?

Quote:

Originally Posted by ShadowRex

Quote:

Originally Posted by bambooseven

get a bar of soap and run it on the belt while the motor is on

and watch yer little fingers lol Ya need them to open boxes LOL

haha! what?!

hotrex

11-29-2003 02:01 PM

Re:sqealing belts?

go to auto zone and get a can of belt dressing for 1.29. works like ma champ

45psi

11-29-2003 03:14 PM

Re:sqealing belts?

belts tightened.

All times are GMT -5. The time now is 06:47 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page