spun bearing... last how long?
11-26-2007, 04:01 PM
#22
0.5 BAR
Join Date: Dec 2004
Posts: 165
Re: spun bearing... last how long?
either way if you drive it like that you have a greater chance of ruining the crank, rod, or even the block if its a main bearing.
I put a d16y5 oil pump in my y7, i dont know if the shitty 96+ d's have a weakness in the crank oil holes or the pump but the more expensive "high performance" oil pump i purchased turned out to have a y5 part number.
I put a d16y5 oil pump in my y7, i dont know if the shitty 96+ d's have a weakness in the crank oil holes or the pump but the more expensive "high performance" oil pump i purchased turned out to have a y5 part number.
11-27-2007, 02:23 AM
#24
1.5 BAR
Thread Starter
Join Date: Oct 2006
Posts: 1,147
Re: spun bearing... last how long?
ya i got the bitch to give me a ride to school and a buddy home
probably not going to start the car till like spring
other then disconnecting the battery you guys have any good storage ideas for the winter
its in a under ground parking lot
probably not going to start the car till like spring
other then disconnecting the battery you guys have any good storage ideas for the winter
its in a under ground parking lot
11-27-2007, 05:21 AM
#25
0.5 BAR
Join Date: Sep 2003
Posts: 197
Re: spun bearing... last how long?
If its knocking BAD then the crank will be fucked. but if its knocking faintly you can throw in a new or even used bearing and itll last. I polished my crank and threw in a used bearing and the engine lasted me a while. I used the old rod. I did it cuz I wanted to see if it woudl last and I didnt feel like pulling the tranny to change the crank. It ran well but spun it again.
11-29-2007, 08:24 PM
#27
1.5 BAR
Thread Starter
Join Date: Oct 2006
Posts: 1,147
Re: spun bearing... last how long?
Originally Posted by Joseph Davis
You get 7-10k cheesing in a bearing like that, unless the crank is really heat scarred.
it will be enough to learn/get a new tune going
11-29-2007, 08:32 PM
#28
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: spun bearing... last how long?
knock knock
throw the crank in the trash
Or dont listen waste your time and money
storage ideas um windows up. My old civic sat around for almost 18 months before I worked on it again. New motor. Fresh fluids. Old tank of gas
Rapped the rev limiter for a good 10 minutes
fix a leak stuff clogged raditor after rapping blowing off a hose spraying sparkles all of my mad jdm motor
New hose
went rapping again
threw a rod 2 weeks later
throw the crank in the trash
Or dont listen waste your time and money
storage ideas um windows up. My old civic sat around for almost 18 months before I worked on it again. New motor. Fresh fluids. Old tank of gas
Rapped the rev limiter for a good 10 minutes
fix a leak stuff clogged raditor after rapping blowing off a hose spraying sparkles all of my mad jdm motor
New hose
went rapping again
threw a rod 2 weeks later
