HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   slave cyl. question HELP!!! (https://www.homemadeturbo.com/hybrid-tech-8/slave-cyl-question-help-47738/)

X_Josh411_X 10-10-2005 05:07 PM
slave cyl. question HELP!!!
 
1 Attachment(s)
well I finally got over the headache of my hydraulic to cable conversion kit in my 93 civic hatch. It was actually so easy to install I feel stupid. But, to my question now. My reservoir is full, lines have been bled to get rid of air, but my slave cylendar dont move like it should. I believe that when I press my clutch the little ball on the slave cyl. should pop out, right? then when I let off it goes back? Well, I have to pump my clutch a few times in order to actuate my slave cyl. Then the tranny arm goes up but wont go back down. heres a pic of the setup, i could use some help. do I just need a new slave cyl? thanx.

Attachment 37531

HMT-Admin 10-11-2005 03:56 PM
Re: slave cyl. question HELP!!!
 
how in the hell is that slave even mounted? it looks like its floating in the air under the arm of the release fork.

There should be no fluid leaking out of the slave at all, it should retract smoothly when releasing off the clutch pedal.

X_Josh411_X 10-11-2005 04:40 PM
Re: slave cyl. question HELP!!!
 
1 Attachment(s)
Originally Posted by AbaZ
how in the hell is that slave even mounted? it looks like its floating in the air under the arm of the release fork.

There should be no fluid leaking out of the slave at all, it should retract smoothly when releasing off the clutch pedal.
well I guess I need a new damn slave cylendar then. >:( dammit. Heres a pic of how its mounted right now. I couldnt get 2 bolts through it but I am working on a second bracket for the other bolt hole. I'll post pics when finished.
Attachment 37525

HMT-Admin 10-11-2005 04:54 PM
Re: slave cyl. question HELP!!!
 
man, are you kidding me? that looks very half ass? 1 bolt? I think you need to compress the cylinder and mount it up with both those bolts?

X_Josh411_X 10-11-2005 06:55 PM
Re: slave cyl. question HELP!!!
 
1 bolt is all that fits. Like I said I'm working on making a new bracket that'll hold both bolts, but if I use both bolts on this one it moves the lever up. That one bolt is also the only bolt in all of it right now, just up there to fit and see what needs modified.

HMT-Admin 10-11-2005 07:10 PM
Re: slave cyl. question HELP!!!
 
hmm, is this a homemade setup I assume? The slave needs to be fully compressed riding right on the release lever in order for this to work right. Have someone press the clutch in and out and watch to see if the whole unit is moving around, I cant imagne 1 bolt being enough support for that.

con 10-12-2005 08:05 PM
Re: slave cyl. question HELP!!!
 
your rever going to bleed out the air with the bleeder screw at the bottem ::)


All times are GMT -5. The time now is 07:37 PM.


© 2024 MH Sub I, LLC dba Internet Brands