single cam into 1rst gen crx
 

hey guys, i was just wandering what is needed to put a d15b into a 87 crx si.

its already FI and stick, im am just curious as to what is need in terms of mounts and axles.

i found a bodyman that is willing to do all my body work on my teg in exchange for a d series motor.

i searched, found nothing tHANKS.

Re:single cam into 1rst gen crx
 

Re:single cam into 1rst gen crx
 

everything you need to know is on that site. ;)
its 100% dedicated to 1Gen and 2Gen honda's

Re:single cam into 1rst gen crx
 

put a d16a1 in there.

Re:single cam into 1rst gen crx
 

thats a zc from the 1rst gen teg right? if that fits then the d15b vtec should fit too with a 1rst gen teg tranny or a 4th gen civic tranny.

am i right or wrong?

Re:single cam into 1rst gen crx
 

I dont know if you will be able to see this or not....

but here are some links from redpepperracing.com

http://www.redpepperracing.com/gallery/SCC-ZC-Article

http://www.redpepperracing.com/forum...howtopic=13600

i could go on and on...but i dont know if you will be able to see the links without having an account....but there is ALOT of good info on there sites, i would highly reccomend looking at them, and regestering...


edit
it can be done
http://www.hs3.net/rides/brian/09.jpg
http://www.hs3.net/rides/brian/08.jpg

Re:single cam into 1rst gen crx
 

8)

Re:single cam into 1rst gen crx
 

Frank, I posted that stuff a while ago, because I had found a 1g for $200 and was wondering if i could've swapped my D into her.

From what I've looked into, its not worth it. I think that you have to eliminate one of the motor mounts, and it rattles like a bitch :-\

Re:single cam into 1rst gen crx
 

Hey, I'm the co-founder of rpr and we have done a 88-91 JDM SOHC ZC with a 92-95 S20 LSD trans into an 87 Civic hatch. It is a full custom install, it took us 5 weeks and the mounts were fairly easy, the hardest part was the hydro-to-cable clutch setup, here's some pics:

The trans. mount
http://www.redpepperracing.com/galle.../aap.sized.jpg

The ghetto rear mount
http://www.redpepperracing.com/galle.../abc.sized.jpg

The hydro-to -cable conversion
http://www.redpepperracing.com/galle.../acn.sized.jpg

Del Sol dual core 1/2 rad
http://www.redpepperracing.com/galle.../acm.sized.jpg

Front mount before we cut and re-welded to fit into the P/S steering mount
http://www.redpepperracing.com/galle.../aaj.sized.jpg

4-point cage we built
http://www.redpepperracing.com/galle.../abs.sized.jpg

Front mount after it was cut and welded
http://www.redpepperracing.com/galle.../aci.sized.jpg

ECU mount for easy access
http://www.redpepperracing.com/galle.../acr.sized.jpg

Motor as it sits now with custom camber/caster plates and STB
http://www.redpepperracing.com/galle.../aaa.sized.jpg

Car as it is now, my buddy who is the other c0-founder of rpr raced it and won his class championship in his first year of Solo 1. Thecar is incredibly fast with a stock motor, this winter will bring a cam change along with a DIY ITB setup and we will finish the front cage.

http://www.redpepperracing.com/galle.../aaa.sized.jpg

how's that for a homemade setup!

Re:single cam into 1rst gen crx **now w/ pics**
 

:o, wow, finaly some real feed back!!!.

j/k, but thats beautiful, but seems like alot of work, i think id rather just save up and pay the guy to paint my car instead ::)

nice setup, i need to see a vtec head and a snail bolted to it real soon! ;D