Re: short answer, putting b16/ls in EF
 

dont forget the b series throttle cable! :P

Re: short answer, putting b16/ls in EF
 

and clutch cable
and wiring
and
and
and



lol

Re: short answer, putting b16/ls in EF
 

And then?

NO AND THEN!

Re: short answer, putting b16/ls in EF
 

im still using the stock clutch cable and only had to change 1 plug on the harness (no knock sensor)

Re: short answer, putting b16/ls in EF
 

Yup, stock clutch cable will work. You need the b-series throttle cable though, like mentioned, 90-93 integra.

Re: short answer, putting b16/ls in EF
 

wiring up for example a gsr is a little different than an ls especially if you do it with a p72 and retain all the factory stuff



you should switch out for the integar clutch cable

Re: short answer, putting b16/ls in EF
 

what's so difficult about the axles?

Re: short answer, putting b16/ls in EF
 

depening on trans and half shaft used



along if you use hyrdo or cable trans etc etc etc



want 10 years of experince in on post sorry my info isnt sold for free



Want it done right my rate is 55 an hour :)