HomemadeTurbo - DIY Turbo Forum
Page 4 of 6
1
2
3
4
5
6
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Shifting issues with Prelude *updated 4/6/08* (https://www.homemadeturbo.com/hybrid-tech-8/shifting-issues-prelude-%2Aupdated-4-6-08%2A-90306/)

ghettoturbo 03-23-2008 06:58 PM
Re: Shifting issues with Prelude
 
Originally Posted by bigdaddyvtec
...... And Im pretty sure its nopt a disengagement issue or it would happen in all gears....
Hmm, i dunno. You can shift without the clutch disengaged once the car is moving, but with 1st it wont happen, so it could be something related to the disengagement. blah who knows

bigdaddyvtec 03-23-2008 07:02 PM
Re: Shifting issues with Prelude
 
How about in the higher RPMS???? WIth that one fucked up clutch I had it wouldnt disengage at 7500 RPMS. It was the clutch...

Like to try to help if i can... We put a acorn nut on the end of my slave cyl rod to effectively lengthen the rod and give the thing more throw. It helped, reaafirming that the clutch was fucked up... Im assuming the step was done wrong when i had the FW surfaced.

bigdaddyvtec 03-23-2008 07:05 PM
Re: Shifting issues with Prelude
 
Just watched thew vid.


Clutch is gay.

Pull the tranny.

---- if I was close id help you out, im pretty ------- good at taking them out and stuffin em back in nowadays!!!


LOL.

BigD 03-23-2008 07:10 PM
Re: Shifting issues with Prelude
 
Originally Posted by bigdaddyvtec
IF YOURE SURE ITS BLED CORRECTLY...
This is what I'm hoping on. I'm going to try the little crap first and keep my fingers crossed. I know on my Del Sol the clutch started slipping, so it was obvious it was going out. This one doesn't slip at all, which is why I'm hoping it's something simple like the fluid. You any good at building trannys? lol, I'll sling you mine if I have to replace the clutch and let you throw some syncros in it. :-*

BigD 03-23-2008 07:15 PM
Re: Shifting issues with Prelude
 
Oh another weird ass thing. When I'm driving and coming to a stop when I'm at about 3-5mph I can put it into 1st like nothing. Works just fine, but if I come to a complete stop I might have the issue I shown. ???

bigdaddyvtec 03-23-2008 07:20 PM
Re: Shifting issues with Prelude
 
Thats the syncros doing there thing. They are fine, I think its the clutch from the vids and your posts.

Gay.

I feel your pain

gen4acclude 03-23-2008 07:23 PM
Re: Shifting issues with Prelude
 
Originally Posted by bigdaddyvtec
Its not the ------- MTF (and honda ---- is actually some of the better), its not the ------- Throwout bearing...... And Im pretty sure its nopt a disengagement issue or it would happen in all gears....

:1

Wrong

Now that ive read the thread more thoroughly sounds like the clutch is done.... IF YOURE SURE ITS BLED CORRECTLY...


Trust me, Ive BATTLED H series tranny faggotdom
yah thats what i was trying to tell the little O0let, yah mtf it pretty good put i have my preference just like you have yours, im leaning towards a bleed or a clutch with worn pressure plate

Zeniceguycrx 03-23-2008 10:20 PM
Re: Shifting issues with Prelude
 
stop ------- around with it

right now u need a clutch, if u keep pressing it into gears you will need a clutch and a tranny

BigD 03-23-2008 10:25 PM
Re: Shifting issues with Prelude
 
I only did that for the video to show what it was doing. I don't sit and do that for shits and giggles all the time.

Zeniceguycrx 03-23-2008 10:31 PM
Re: Shifting issues with Prelude
 
Plus, once the tranny is out you could always get it looked at


All times are GMT -5. The time now is 04:36 PM.
Page 4 of 6
1
2
3
4
5
6
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands