HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   S20 ISB noise (https://www.homemadeturbo.com/hybrid-tech-8/s20-isb-noise-92565/)

JoshMO 06-04-2008 10:48 AM

S20 ISB noise
 
I have a constant chatter coming from my transmission and it only does it while the clutch isn't pressed in. The noise stops completely while the clutch is pressed in. I've noticed also that its starting to make a loud noise while driving throughout all gears now. I'm almost 100% positive that its going to be the input shaft bearing. I've searched but can't seem to find a part # for it. I've never replaced one of these before... so am I looking at a PITA all day thing or is this going to be fairly straightforward repair?


Mista Bone where you at?




----Yeah yeah I know "you said you weren't going to post anymore". HMT is my addiction. And my apologizes for calling all mods Nazi assholes. Just a few of you are. :-*

HMTguy 06-04-2008 11:01 AM

Re: S20 ISB noise
 
JoshEMO, this has been asked a million times on many websites. Do yourself a favor and google something before you ask about it.

JoshMO 06-04-2008 11:21 AM

Re: S20 ISB noise
 
I did JackOff. I wasn't able to locate a part#. And I don't have a haynes manual.

Anyone know the answer to my original question?

stenseltizm 06-04-2008 11:31 AM

Re: S20 ISB noise
 
Input shaft bearing, fairly straight forward and you should have it knocked out in about an hour. Unless you have a lift then 30 min.

HMTguy 06-04-2008 11:33 AM

Re: S20 ISB noise
 

Originally Posted by JoshMO
I did JackOff. I wasn't able to locate a part#. And I don't have a haynes manual.

Anyone know the answer to my original question?

Obviously you didn't search because THE ANSWER IS ON THE FIRST ------- PAGE OF THIS FORUM

JoshMO 06-04-2008 11:41 AM

Re: S20 ISB noise
 
I used google with no luck. I didn't SEARCH this forum because the function blows. I'll check the first page...

HMTguy 06-04-2008 11:45 AM

Re: S20 ISB noise
 
The search function works perfectly fine. Sounds like operator error.

JoshMO 06-04-2008 11:50 AM

Re: S20 ISB noise
 
Sounds like you have something lodged in your anus.
Lot of dead links in that post, but I've found a working one on spoonhonda.com, maybe I'll find what I'm looking for in there. Thanks Jago

HMTguy 06-04-2008 12:02 PM

Re: S20 ISB noise
 
You still missed it? ???

All it takes is looking on the first page here, or searching for input shaft bearing. You can't seriously be that ignorant?

JoshMO 06-04-2008 12:08 PM

Re: S20 ISB noise
 
No dude I was downloading a manual. But that torrent is dead anyways. I'll just use the damn search function so you'll stay off my bawsack.


All times are GMT -5. The time now is 11:04 AM.


© 2024 MH Sub I, LLC dba Internet Brands