Rotary bliss
#1
Rotary bliss
Friend of mine did this:
[quote name='FDokinawa' date='Jul 3 2008, 12:52 AM' post='430445']
Got some nice pics of Scott building my engine..
They can all be found here.. CLICKY!
some highlights..
The ports
start with the end plate
Add a rotor housing
After putting springs and seals on one rotor.. add that.
Have a friend help you with the E-shaft and center housing..
Repeat steps 1 and 2..
Be sure to lubricate it fockers..
Apply the last end plate.. and tighten
Mix in the good stuff..
And you end up with one bad *** rotary engine!!
[/quote]
[quote name='FDokinawa' date='Jul 3 2008, 12:52 AM' post='430445']
Got some nice pics of Scott building my engine..
They can all be found here.. CLICKY!
some highlights..
The ports
start with the end plate
Add a rotor housing
After putting springs and seals on one rotor.. add that.
Have a friend help you with the E-shaft and center housing..
Repeat steps 1 and 2..
Be sure to lubricate it fockers..
Apply the last end plate.. and tighten
Mix in the good stuff..
And you end up with one bad *** rotary engine!!
[/quote]
#5
Re: Rotary bliss
Originally Posted by SDRAWKCAB
For some reason I thought they had 3 rotors. :1