Resurfacing the head?
 

What do you guys think about resurfacing the head? I had my bottom end sleved and rebuilt. Should i get the head resurfaced befor i put it back together? I didnt have any problems with the head or the head gasket befor.

Re:Resurfacing the head?
 

atleast go take it to a shop and have them shave it just a bit to make sure it is perfectly flat, if it is fucked up just a little bit your hg will blow super fast

have the block decked too

Re:Resurfacing the head?
 

no one ever really decks honda blocks, ive never heard of one warping

Re:Resurfacing the head?
 

ummm unless im mistaked the 94 h22a is closed deck

Re:Resurfacing the head?
 

You didn't say it was a 94 H22 and that wouldn't matter anyways. You can deck any block.

I would get the head surfaced anyways, just to be safe. You have a nice clean surface on the block, why not make the head the same way? It would eliminate any possible problems with a blown head gasket, ar at least greatly reduce them.

Re:Resurfacing the head?
 

True VERY true

Re:Resurfacing the head?
 

this has nothing to do with what we are talking about

Re:Resurfacing the head?
 

This is what i was talking about...

Re:Resurfacing the head?
 

still, the fact that the h22 is closed deck means nothing in this thread. As jigga mentioned, any block can be decked (meaning taking a little off the top)

Re:Resurfacing the head?
 

if you spend all those $$$ to build a block, why halfass it because of 20 bucks.