resleeving f22
Do i need to resleeve my f22 bock out of 91 accord when i build it and is the block closed deck.
|
Re:resleeving f22
open deck, and the stock sleeves are ------- solid... you do not need to relseave these blocks to see high hp.
|
Re:resleeving f22
I think it has cast iron cylinders? someone correct me if I'm wrong. If anything just do a piston swap for some better compression or turbo compatability.
|
Re:resleeving f22
Originally Posted by quadnie
I think it has cast iron cylinders? someone correct me if I'm wrong. If anything just do a piston swap for some better compression or turbo compatability.
|
Re:resleeving f22
it has really nie sleves stock, no need to mess with them. the f22 is like a 4G63T engine minus the Turbo w/ .2L more. bullet proof :)
|
Re:resleeving f22
we were discusssing this in forced induction, a wealth of smart f22 geeks have gathered for our amusement :P
|
Re:resleeving f22
Originally Posted by quadnie
we were discusssing this in forced induction, a wealth of smart f22 geeks have gathered for our amusement :P
run for ur lives |
Re:resleeving f22
i bet if I said a bunch of homosexual geeks your candy ass would be running for your rubbers.
Ravage, you're such a queen :P |
Re:resleeving f22
i'm not trying to start an argument or anything, but if the F22 is so bulletproof why do i keep finding accords with f22's all stock (w/auto tranny no less) with rods hanging out the sides of the block? is there a problem with r/s ratio, oil delivery with high miles, or just a coincidence? i've been looking at building an F22 for an upcoming project and was starting to get a little worried after seeing these other cars.
just wondering, and would like some input from some of those with more f-series experience. |
Re:resleeving f22
people trying to rape the ---- out of them with 200k on them.. thats what blows them up.. pretty shitty r/s ratio to.
|
Re:resleeving f22
Same thing with accord a20 engines, bullet proof as all hell, cast iron block strong as F... Stock rods good to 400+hp... Still you see rods thru the oil pan on these engines too, mostly people overreving/running them out of oil etc/overheating its usually neglect or serious abuse that make a20 and f22 break. The only thing i dont like about the f22 is that somtimes they use TONS of oil (1qt=200mi) from bad rings, even then they still run good except they eventually crack an exhaust valve.
|
All times are GMT -5. The time now is 09:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands