Rebuilt d16a6 looking to turbo
 

***SCROLL DOWN FOR QUESTION***
Hey everybody, I'm looking to put a turbo on a d16a6 that I'm in the process of rebuilding. I'm in need of just a random ballpark number with respect to the stock bottom end, both hp wise and how this would relate to psi on a t25, which is what I'm looking at getting. I've read about injectors the safc and 6btm so that's on my list, unless I can figure out that turboedit stuff...

All internals like rods and pistons are being reused, I'm using a dx head because that's what I've got lying around and the si head is raped. I might switch the cams if possible. And I'm not over boring the walls because clearances are good, just deglazing them.

Basically I'm replacing whatever seals I can get to as well as rod bearings and piston rings.

So how much can this hold? Any numbers whatsoever.

******What I'm more interested in is what kind of hp numbers can I achieve on 91 octane with some safe tuning on a daily driver****

thanks

Re:Rebuilt d16a6 looking to turbo
 

with conservative boost and tuning,.. 150-175 i'd say.

(at the wheels)

Re:Rebuilt d16a6 looking to turbo
 

with conservative boost and tuning i'd say about 160-175 on about 6psi good luck with it man