jarebear667

need to know if there is a difference in size from the usdm from the jdm tranny seals on the differential.(passesnger side) i have gone to honda to get the damn things and now they are thinking they package the 2nd one wrong and the guy ordered the wrong one the 1st time, right now im getting 55mm outside dia. on the seals and im looking for 58mm on the outside but when i go online and check they are giving me 40x58x8 dimesions for that part number so my question is are they different from the usdm to jdm tranny's or are they getting me wrong ones, and if someone could measure their spare tranny to double check.. this is pissing me off..

thanks for any help fellas.

widebody93

Is your trans the m or p or t series. I have the m2s4 case and they are also different sizes on each end of the diff. Go to advanced auto and go through all the seals for a 91-00 accord and 92-00 prelude. I belive i got my seal for mine based off of a p2a5 trans. It was green in color if that helps any. List the part numbers if you get it right for future request i guess and have it sticky fide. Lol let me know if it helped any. And spike r normally just gets used trans and breaks them before any maint is possible.

bigdaddyvtec

tranny code please......

widebody93

You going to have your trans ready anytime soon Spiker?

bigdaddyvtec

Probably ------- not, but the clutch got put bak in last night..... Its ready to rock and roll other than the ------- gears im waitning on... Im getting pissed off.

jarebear667

alright i will have to giveat a try umm idk if i have the code on mine the sticker is off i will go and check, its from a 93 jdm prelude.. so idk if thats whats ------- with me or what.. ahh damnit.. thanks for all the info guys i will try to get all of the info i can on that ---- from the guys at the parts store.

widebody93

Just pop the seal and take it to VATO zone, or ADVANCED

jarebear667

well i would but the seal is fucked to be hell, all i can get out of it is outside dia. which is 58mm... but im not sure what tranny it is yet..

bigdaddyvtec

K


93 JDM prelude LSD You should be able to use the prospective seals...... Id just go order one off majestic..


ANY Lude seal will work regarless of year (I looked it up for you)





# 13 in the pic


Part number 29109 48x58x8mm oil seal 5.40...




You are welcom sir... I may have one, but ----... Id just buy anew one if I were you... They are the same as the JDM ones as well nig.

jarebear667

well i have tried that 3 times. and when they get there that are actually only 55mm outside diameter.... and not 58mm.. i have been there and done that too and she gave me a couple seals to look at and i measured them and then went and looked up the part number and the measurements didnt match on any of them.. so i looked up a seal that was larger with the correct inside diamter and width i ordered one from a 99 si b series tranny just for kicks to figure this ---- out.. and alll the seals at honda from 92-00 and accord and prelude all have that same seal and number as 13 and same thumbnail.. and they say 58mm but are only 55mm..